Need help?Do you have a question about the Pro-Ject Audio Systems ESSENTIAL III and is the answer not in the manual?
General| Drive System | Belt drive |
|---|---|
| Cartridge | Ortofon OM 10 |
| Output | RCA |
| Effective Arm Length | 218.5 mm |
| Outboard Power Supply | Yes |
| Speed | 33, 45 |
| Main Bearing | Steel |
| Tonearm | 8.6" aluminum tonearm |
| Power Consumption | 4.5 Watts |
| Overhang | 22.0mm |
Lists and explains the physical controls and connection points of the turntable.
Lists and describes the various accessories included with the Pro-Ject Essential III.
Instructions for installing the platter and drive belt.
Guide on how to install a cartridge and replace the stylus.
Details on how to set the vertical tracking force for optimal playback.
Explains how to adjust the anti-skating force based on VTF.
Instructions for setting the azimuth angle for correct groove tracking.
Identifies and describes the ON/OFF switch, stepped drive pulley, and output cable.
Explains how to start/stop the motor and change replay speeds.
Guide on connecting the record player to an amplifier, including phono and line inputs.
Lists controls for Bluetooth model: ON/OFF, pulley, output, Bluetooth switch.
How to start/stop the motor and change replay speeds.
Connecting to amplifier via Phono OUT or Line OUT.
Details on automatic and manual pairing of Bluetooth devices.
Identifies ON/OFF, pulley, and output/earth connection.
How to start/stop the motor and change replay speeds.
Connecting to amplifier via Phono or Line output.
Lists controls: Speed control, Drive pulley, Phono output/earth.
How to start/stop motor and select speed (33/45 RPM).
Connecting the tonearm cable and grounding cable to the amplifier.
Lists controls: ON/OFF, pulley, output, digital output switch.
How to start/stop the motor and change replay speeds.
Connecting analog output to amplifier (Phono/Line).
Lists controls: Speed, pulley, output, switch.
How to start/stop motor and select speed (33/45 RPM).
Connecting Phono/Line output to amplifier.
Guide for connecting the turntable to a computer via USB.
Advice on selecting and downloading recording software.
Lists detailed technical specs for the turntable model.
Provides specifications for the Ortofon OM 10 cartridge.
Specs for the phono pre-amplifier in the Digital model.
Specs for the phono pre-amplifier in Phono/RecordMaster models.
Technical specifications for the Bluetooth function.
Troubleshooting steps for a platter that does not spin.
Troubleshooting steps for loss of audio signal.
Causes and solutions for hum on the phono input.
Troubleshooting steps for distorted or inconsistent audio output.
Instructions on how to get service or contact the dealer.
Information regarding the product warranty and manufacturer responsibility.
Illustrates the packaging of the turntable and its components.
Declaration of conformity for the Essential III BT model.
Lists EU directives related to the product's compliance.
Lists harmonized standards applied for conformity.
Details of the EMC test report for the Essential III BT.
Certificate for the Bluetooth audio transmitter module.
To Next Page
