Pro-Ject Audio Systems ESSENTIAL III - Essential III Digital Specific Information; Controls, Features, and Connections; Operation and Speed Change; Amplifier Connection

© Pro-Ject Audio Systems · Pro-Ject Essential I I I Flex i- Rang e · Revision 2018.05.15
11
ESSENTIAL III Digital SPECIFIC INFORMATIONS
Controls, features and connections
1 ON/OFF SWITCH
2 STEPPED DRIVE PULLEY
3 PHONO/LINE OUTPUT, EARTH CONNECTION
4 PHONO/LINE OUTPUT SWITCH
5 DIGITAL OUTPUT SWITCH (24bit/48kHz or 24bit/96kHz)
___________________________________________________________________________________________________________
Switching on and off
Pressing the ON/OFF switch alternately starts or stops the motor.
Changing replay speed
To play 45 r.p.m., put the drive belt over the larger diameter part of the motor pulley. To revert to 33
r.p.m. repeat the proceedings using the smaller step on the pulley.
Connection to the amplifier
The record player has two possibilities of connection to the amplifier.
The analog output:
The record player has gold plated female RCA phono sockets and possibility to choose between Phono and
LINE output. With LINE OUT on, you can use a line input (such as AUX, CD, Tuner, Tape or Video) on your
amplifier. With PHONO OUT on, you can use your own phono pre-amplifier (sometimes labelled gram, disc
or RIAA).