Need help?Do you have a question about the Pro-Ject Audio Systems Primary E Phono and is the answer not in the manual?
General| Type | Belt drive |
|---|---|
| Drive | Belt drive |
| Effective arm length | 218.5 mm |
| Overhang | 18 mm |
| Cartridge | Ortofon OM 5E |
| Stylus type | Elliptical |
| Frequency response | 20 Hz - 20 kHz |
| Signal-to-noise ratio | 65dB |
| Wow and flutter | 0.29% |
| Power consumption | 4.5 W |
| Speed | 33, 45 RPM |
| Output | RCA |
| Dimensions | 420 x 115 x 340 mm (WxHxD) |
| Included accessories | Power supply, dust cover |
Controls the power supply for the record player.
Part of the mechanism for rotating the platter.
The rotating surface where the record is placed.
Adjusts the tracking force of the stylus.
Mechanism to raise and lower the tonearm.
Secures the tonearm during transport.
The arm that holds the cartridge.
Holds the cartridge and allows for manual adjustment.
Protects the turntable from dust.
Connects the lid to the turntable body.
Screws or clips used to attach the lid hinges.
Connection point for the external power adapter.
Selects the audio output mode for the amplifier.
Connects the turntable to a phono pre-amplifier or amplifier.
To Next Page