Pro-Ject Audio Systems ESSENTIAL III - Essential III Phono Specific Information; Controls, Features, and Connections; Operation and Speed Change; Amplifier Connection

To Next Page

To Previous Page

ESSENTIAL III Phono SPECIFIC INFORMATIONS

Controls, features and connections

1 ON/OFF SWITCH

2 STEPPED DRIVE PULLEY

3 PHONO/LINE OUTPUT, EARTH CONNECTION

4 PHONO/LINE OUTPUT SWITCH

_____________________________________________________________________________________________________________

Switching on and off

Pressing the ON/OFF switch alternately starts or stops the motor.

Changing replay speed

To play 45 r.p.m., put the drive belt over the larger diameter part of the motor pulley. To revert to 33

r.p.m. repeat the proceedings using the smaller step on the pulley.

Connection to the amplifier

The record player has gold plated female RCA phono sockets and possibility to choose between Phono and

LINE output. With LINE OUT on, you can use a line input (such as AUX, CD, Tuner, Tape or Video) on your

amplifier. With PHONO OUT on, you can use your own phono pre-amplifier (sometimes labelled gram, disc

or RIAA).

Take care to connect the left and right channels correctly. The right channel is usually marked red, the

left channel black or white. The earthing wire of the tonearm lead should be connected to the earth

terminal on your amplifier (if provided).

Other manuals for Pro-Ject Audio Systems ESSENTIAL III