Need help?Do you have a question about the Pro-Ject Audio Systems 1 Xpression III and is the answer not in the manual?
General| Drive System | Belt drive |
|---|---|
| Speed | 33, 45 (manual speed change) |
| Effective arm length | 218.5 mm |
| Tracking force | 10 - 30mN |
| Power connection | 110/120 or 230/240 Volt - 50 or 60 Hz |
| Power consumption | 2W |
| Weight | 5.5 kg |
| Main bearing | Stainless steel |
| Overhang | 22.0mm |
| Dimensions | 415 x 118 x 320mm (WxHxD) |
| Tonearm | 8.6" Carbon Fiber Tonearm |
Adjusting the force applied by the stylus to the record groove.
Setting the tonearm tube parallel to the record surface for accurate playback.
Ensuring the cartridge needle is vertical in the record groove for correct tracing.
Connecting the record player to the amplifier's phono input.
Connecting the turntable to the mains power supply.
Attaching and adjusting the dust cover for proper function.
Instructions for starting and stopping the turntable motor.
Procedure for switching between 33 and 45 RPM playback speeds.
Guidelines for cleaning and maintaining the record player.
Installing and wiring a cartridge to the headshell.
Recommendations for optimal sound quality and placement.
Common issues arising from improper use or circumstances.
Guidance on seeking professional assistance for unresolved problems.
Information regarding manufacturer responsibility and product modifications.
To Next Page