Pro-Ject Audio Systems ESSENTIAL III - Technical Specifications; Turntable Specifications; Cartridge Specifications; Phono Pre-amplifier Specifications (Digital)

© Pro-Ject Audio Systems · Pro-Ject Essential I I I Flex i- Rang e · Revision 2018.05.15
14
Technical specifications Pro-Ject Essential III Flexi-Range / Pro-Ject 8.6
Nominal speeds 33/45 r.p.m.
Speed variance 33: ±0,70% 45: ±0,60%
Wow and flutter 33: ±0,21% 45: ±0,19%
Signal to noise -66dB
Effective tonearm mass
8,0g
Effective tonearm length 8,6" (218,5mm)
Overhang 22,0mm
Power consumption 4,5W
Outboard power supply 15V/500mA DC, suitable for your country's mains supply
Dimensions (W x H x D) 420 x 112 x 330mm
Weight 5,0kg
Dimensions packaging (W x H x
D)
488 x 235 x 393mm
Weight incl. packaging 7,0kg
Technical specifications MM-Cartridge Ortofon OM 10
Frequency range 20-22.000Hz
Channel separation 22dB/1kHz
Output voltage 4mV
Recommended load impedance 47kohms/amplifier connection – MM-input
Compliance/stylus type 20µm/mN – elliptical
Recommended tracking force 15mN
Weight 5g
Technical specifications MM phono pre-amplifier (Essential III Digital)
Gain 34dB
Output voltage typically 160mV/1kHz at 4mV/1kHz input
Input impedance 47kohms/100pF
Noise floor >73dB
RIAA-equalisation curve accuracy
20Hz-20kHz / max. 0,5dB
Optical output: 24/48 kHz or 24/96 kHz (bit depth/sampling frequency)
Technical specifications MM phono pre-amplifier (Essential III Phono,
RecordMaster)
Gain 34dB
Output voltage typically 200mV/1kHz at 5mV/1kHz input
Input impedance 47kohms/100pF
Noise floor -68dB
RIAA-equalisation curve accuracy
20Hz-20kHz / max. 0,5dB
Weight
Bluetooth
Maximum transmit power per
operated frequency band
2,8 kg
Class II, 2.5mW (4dBm) per 2.4GHz – 2.48 GHz