Pro-Line System CS300FU - Relay Mode Explanations

Function Description
Setting options Factory setting
SLOW
Retardation time from maximum speed to minimum speed.
O, 1 Sec. - 2 Sec. 1,0 Sec.
DOWN
BRAKE P
The OPEN bra ke point lies before the OPEN limit switch value. When the OPEN brake
0-999 250
OPEN
point is passed, the retardation time SLOW DOWN is activated. The adjustable value is
based on the distance from the OPEN limit switch.
BRAKE P The CLOSE bra ke point lies before the CLOSE limit switch value. When the CLOSE
o -999
250
CLOSE
bra ke point is passed, the retardation time SLOW DOWN is activated. The adjustable
value is based on the distance from the CLOSE limit switch.
U START The start-up voltage increases the performance of the door operators at low rotational
0-42V
20V
speeds.
F START The start-up frequency increases the performance of the door operators at low
O-10Hz
3Hz
rotational speeds.
BRAKE
The bra ke retardation delays the falling off of the bra ke when the door operator starts
0-500
50
RETARDATION up.
RA TED
This is the frequency rating of the motor
MOD1= 50 HZ, Set to match the
FREQUENCY
MOD2=87 Hz, motor supplied
MOD3=100 Hz
P/E BARRIER
The photoelectric harrier signal is not evaluated between the CLOSED end position o ... 999
300
and the photoelectric harrier. This function masks the photoelectric barrier signal at
low rotational speeds to avo id interference resulting, for instance, from spiral cables.
Explanation of the relay modes:
A.
Traffic light functions
MOD Description
CLOSED end OPEN end
Forewarning
Door run
position position
MOD1 Red traffic light 1
ON 1 OFF* OFF Flashing ON
MOD 2
Red traffic light 2
ON 1 OFF*
OFF
Flashing Flashing
MOD3
Red traffic light 3
ON 1 OFF*
OFF ON
ON
MOD 18
Red traffic light 4 OFF
OFF Flashing OFF
MOD 23 Green traffic light OFF
ON OFF OFF
* depending upon parameter MOD1-3 RESTING