Need help?Do you have a question about the Pro-Line System CS300FU and is the answer not in the manual?
General| Category | Controller |
|---|---|
| Input Voltage | 24 VDC |
| Output Signal | 4-20 mA |
| Communication Protocol | HART |
| Material | Stainless Steel |
Covers product guarantee, safety adherence, and intended purpose for dry rooms.
Defines qualified personnel and installation/connection safety rules.
Explains symbols for danger and information.
Details CS300 FU models and available housing/input options.
Lists relevant construction, EMC, machinery, and low voltage standards.
Identifies components and terminals on the CS 300 FU 0.75 basic board.
Explains frequency control for speed adjustment and lists adjustable parameters.
Details OPEN and CLOSE run speed profiles and brake points.
Explains start-up voltage and brake retardation parameters.
Illustrates the speed profile for the door's opening movement.
Illustrates the speed profile for the door's closing movement.
Illustrates acceleration time settings for door movement.
Ensures gate/door installation and device readiness before operation.
Details connecting the drive to the CS 300 FU-I frequency converter module.
Shows connections for the CS300 FU-E 0.75KW external module.
Shows connections for the CS300 FU-E 1.5/3KW external module.
Provides diagram and safety information for 230V AC mains connection.
Provides diagram and safety information for 400V AC mains connection.
Assigns terminals X3, X4, X5 for command and safety devices.
Details connections for safety edges, barriers, and switches on terminal X4.
Shows connection examples for potential free switch contacts on terminal X5.
Shows connection examples for OPEN/STOP/CLOSE buttons and key switches.
Introduces the LCD monitor, its components, and four operating modes.
Explains AUTOMATIC operation and ADJUSTMENT mode for end position settings.
Describes INPUT mode for parameter changes and DIAGNOSIS for checks.
Outlines how to navigate menus and save door positions.
Details basic input parameters for system settings like running time and speed.
Details advanced input parameters for system settings like self-lock and safety edge.
Describes different states in automatic operation: OPENING, CLOSING, RESTING.
Explains manual operation states: MANUAL UP, DOWN, RESTING.
Lists functions and settings configurable in the input mode, e.g., time, relays.
Details various relay modes for traffic lights, position messages, and functions.
Lists common errors like system response, STOP, and position errors with causes and fixes.
Explains specific error codes (FU 1-16) related to the frequency converter.
Lists dimensions, power, control voltage, temperature, and weight.
Declares conformity to EU directives and standards for safety and EMC.
Shows wiring allocation for the electronic interface and limit switches.
Details wiring allocation for AVE (absolute value encoder) plugs.
To Next Page