pro master Timer Remote - Setting the Timer; Delay;Self-Timer; BULB;Long Exposure; Interval Timer

Setting the Timer
 Use the arrow buttons on the remote to adjust the settings on the timer. Press left or right to
select, up or down to change. The current selection is indicated by the selection cursor.
 Press the SET button at any time to complete the operation and display the new setting for the
selected item. To view other settings, press the arrow button left or right. The current selection is
indicated by the selection cursor. Press the SET button to edit the current setting as described
above.
1. Delay/Self-Timer (Time until shooting starts)
Hours
Minutes
Seconds
2. BULB/Long Exposure (Exposure Time)
Hours
Minutes
Seconds
3. Interval Timer (INT)
Hours
Minutes
Seconds
4. Number of Shots(N)