8699134 PLASTIC WELDING KIT V1.0
2 For technical questions call 1-800-665-8685
SPECIFICATIONS
Material Stainless housing
Fuel Capacity 20 ml
Temperature Flame 2,372°F (1,300°C)
Heated Air 1,112°F (600°C)
INTRODUCTION
Repair plastic parts, components, vehicle bumpers, cracks,
fractures and deep scratches.
SAFETY
WARNING! Read and understand all instructions before using
this tool. The operator must follow basic precautions to reduce
the risk of personal injury and/or damage to the equipment.
Keep this manual for safety warnings, precautions, operating or
inspection and maintenance instructions.
HAZARD DEFINITIONS
Please familiarize yourself with the hazard notices found in this
manual. A notice is an alert that there is a possibility of property
damage, injury or death if certain instructions are not followed.
DANGER! This notice indicates an immediate and specific
hazard that will result in severe personal injury or death if the
proper precautions are not taken.
PLASTIC WELDING KIT
To Next Page
Loading...
