SPECIFICATIONS
Press Capacity 40,000 lb
Press Type Pneumatic/hydraulic
Ram Travel 6 in.
Working Range 3-5/16 to 18-1/8 in.
Bed Width 19-11/16 in.
Overall Height 39-13/16 in.
Pressure Rating 110 to 120 PSI
Material Steel Construction
INTRODUCTION
The workshop press is designed for light industrial use or for home
use. Perform straightening, stamping and bending with this powerful
hydraulic press. Features an H-frame design that makes it perfect for
removing or installing bearings, bushings, gears, ball joints, pulleys,
universal joints and more.
The press features a pneumatic foot control .
SAFETY
WARNING! Read and understand all instructions before
using this tool. The operator must follow basic precautions
to reduce the risk of personal injury and/or damage to the
equipment.
HAZARD DEFINITIONS
Please familiarize yourself with the hazard notices found in this manual.
A notice is an alert that there is a possibility of property damage, injury
or death if certain instructions are not followed.
DANGER!
This notice indicates an immediate and specific hazard that will
result in severe personal injury or death if the proper precautions
are not taken.
WARNING!
This notice indicates a specific hazard or unsafe practice that could
result in a serious injury if the proper precautions are not taken.
V1.0 PNEUMATIC/HYDRAULIC SHOP PRESS 9081548
Page 3 Assistance available at www.princessauto.com or 1-800-665-8685
To Next Page
Loading...
