PRO-PULSE JF72553B - Install Bracket for Pusher Stick; Install Bracket for Mains Plug

JF72553B
40
INSTALL THE BRACKET FOR THE PUSHER STICK (N)
Secure the two brackets (O) to the right-hand side of the saw using
the Philips screws supplied (Fig. 1).
INSTALL THE BRACKET FOR THE MAINS PLUG
Secure the bracket (P) to the left-hand side of the saw using the
Philips screw supplied (Fig. 2).
¿J
¿J
ASSEMBLY AND ADJUSTMENTS
ENGLISH
!
WARNING! Before doing any assembly or maintenance to the table
saw, disconnect the plug from power.