Press the key, the backlight and the illumination
indicator will be on; and press the key anther ,
you will turn off backlight and illumination
indicator. If you don't press the key at all, the
function will automatically be disenabled in 15
minutes.
LED light key. Press the key, the led light will be
on, and press the key another, the led light will
be off.
2.4 Description of input socket
All public input terminals to be measured are
connected to test leads in black or the public output
plugs of exclusive multi-function test sockets.
Positive input terminals (connected to a test lead in
red) for capacitor measurement, diode
measurement, beep on/off test, temperature
measurement, voltage measurement, electric
resistance, frequency, duty ratio measurement.
A / mA positive input terminal (connected to a test
lead in red).
To Next Page
Loading...
