33
Step 2
Parts:
Mounting:
Slide the U-frame against the outside of the U-frame holders
of the base frame. Secure this U-frame with the supplied
carriage bolts (M8x60), washers and plastic rotary knobs.
Make sure the plastic rotary knobs are on the inside (see
picture).
Please note you have to firmly tighten both rotary knobs so
that the U-frame will come on its place well.
Tilt the inner frame back into the upright position as soon as
this mounting is ready. This simplifies the continuation of the
mounting.
End result:
To Next Page
Loading...
