37
THE LICENSEPLATEHOLDER
The clips (2) to mount the license plate can be pressed out and are in the license
plate holder (see picture).
clips
Inserts for clips
LIGHTING
This bike carrier is equipped with a lighting system. This system can be
connected to the tow bar power socket of your car. Seeing that there are
different kinds of sockets that require different kinds of plugs, this carrier comes
with the usual 7-pin plug and the 13-pin plug (Jaegers). As a result, the carrier
can be used with any tow bar!
7-pin plug 13-pin plug (Jaegers)
Both plugs are in one housing. Please cover the plug you don’t use with the
supplied cover.
The rear fog light and reverse light only work with the 13-pin plug!
To Next Page
Loading...
