Need help?Do you have a question about the Pro World TransPro Plus 1620 and is the answer not in the manual?
Instructions for assembling the control box onto the heat press machine.
Connect the power cord to a properly grounded electrical outlet with sufficient amperage.
Specifies required voltage and amperage for 120V and 240V operation.
Recommendations for using extension cords, including gauge and length.
Warning against using circuits with low amperage or high demand equipment.
How to operate the machine in automatic mode using the Ramspin system.
How to operate the machine in manual mode using the Ramspin system.
Instructions on how to switch the heat press system on.
Setting the desired temperature using the control panel buttons.
Setting the desired pressing time using the control panel.
Configuring the press counter value via the control panel.
Identifying the LED display and pressure adjustment knob on the heat platen.
How to adjust pressure using the knob and interpret the readout.
Explanation of the pressure scale displayed on the LCD.
Procedure for printing and pressing, including platen locking and automatic lifting.
Steps to switch the unit display between Fahrenheit and Celsius.
Procedure for calibrating the temperature sensor readings.
Key technical specifications for the heat press models.
Illustrations showing the open view of the heat press and its components.
List and part numbers for control box components and electrical parts.
Part names and numbers for various mechanical components of the press.
Details on machine feet, lower platens, and associated parts.
Information on gas springs, threaded pins, and handle components.
Parts related to heating and electrical functions like thermocouple, thermostat.
List of parts and diagrams for the sliding system.
List of parts and diagrams for the Ramlock system.
Diagram illustrating the electrical wiring for the 120V version.
Information on what is covered and what voids the warranty.
Specifies the warranty period for the heating element and other components.
Procedure for obtaining warranty service and associated shipping costs.
Limitations of liability and scope of the warranty.
General| Brand | Pro World |
|---|---|
| Model | TransPro Plus 1620 |
| Category | Power Tool |
| Language | English |
To Next Page