Pro XK3190-A9+ - Page 29

X K 3 1 9 0 - A 9+
29
[tare]
4 press
[print]
[o *****]
Needed truck No.
5 press
[input]
[hn ***]
Original cargo No.
6
Input new cargo No.
E.g.[ 11 ] [hn 011]
If the original cargo No. is
corresponding, press [tare]
directly, no need of
inputting cargo No.
7 press
[input]
[ Prnt ]
Printing weighing bill
8
Truck leave scale, indicator
shows negative weight
press
[tare]
[ 0 ]
\
back to weighing mode.
VI. set various truck preset TARE weight and manually print weighing bill
step condition display Note
1 press
[truck No.]
[o *****] Original truck No.
2 Input new truck NO.
如[00123]
[o 00123] If original truck No. is
needed, press [input]
directly, no need to input
new truck No.
3 press
[input]
[P *****] Preset tare weight
4 Input preset tare weight E.g.[100] [P 100]
5 press
[input]
[ 000] Back to weighing mode.
Store various truck’s preset
TARE weight
…… [ …… ] Set various truck’s preset
TARE weight.
step1－5
6 Loaded truck is on
platform(wait for stable
light is on)
press
[truck No.]
[o *****] Original truck No.
7 Input new truck No. E.g.
[00123]
[o 00123] If the original truck No. is
corresponding, press
[tare] directly, no need of
inputting truck No.
8 press
[tare]
[ ***] Minus stored TARE
weight
9 press
[print]
[o *****] Needed truck No.
10
press
[hn
Original cargo No.
11 Input new cargo No.
如[ 11 ]
[hn
011]
If the original cargo No. is
corresponding, press
[tare] directly, no need of
inputting cargo No.
12 press
[input]
[ Prnt ] Printing weighing bill
13 Truck leave scale, indicator press [ 0 ] Back to weighing mode