X K 3 1 9 0 –DS3
(14)
Press [Check]
Press [Check]
[o *****]
The second vehicle no.
… … …
n
Press [Check]
Press [Check]
[no nnn]
[o *****]
The last vehicle no.
Press [Check]
[ End ]
Return to weighing
displaying state
(1) During the process of above operation, when the vehicle number is displayed, you may delete the
vehicle number, its memorial tare and all weighing record of the vehicle number by pressing
[Zero]. (Reset mode ②)
(2) After entering in the state of checking, [Check] and [Input] keys have same functions.
XI. Operation of Clearing Record
1. The indicator has following record clearing modes:
Mode : Clear all record (inlcuding all vehicle numbers and ① memorized tare weight)
Mode : Clear a vehicle number, ② memorized weight and all the corresponding weighing records of
the vehicle number;
Mode : Clear the weighing record ③ saved at last time;
Mode : Clear all record④ s of a certain date;
Mode : Clear all the corresponding weighing record⑤ s of a vehicle number (but reserve the vehicle
number and its memorized tare)
Mode :⑥ Clear all the corresponding weighing records of a vehicle number;
Mode :⑦ Clear a random weighing record in the instrument.
2. Using any record clearing mode, [] will be displayed on the indicator for operator’s confirmation. When
[Sure]= a non-zero number, press [Input] for confirmation. For negation, set [Sure]=0 and press [Input] or
[Weighing] to quit.
3. Operation method:
1) Under weighing state, press [Clear] to clear all records. [Mode ①]
2) Under weighing state, press the key [Vehicle No.], input the vehicle number with number keys and
press [Clear] to clear the vehicle number, its corresponding memorized tare weight and record.
[Mode ②]
3) Under weighing state, press [Clear], [9] and then [Input] to clear the record saved at last time. [Mode
③]
4) See clearing modes , , and in the chapter of data record and check.④⑤⑥ ⑦
▲! The 1000 groups of records contain the records cleared by modes ②, ③, ⑤, ⑥ and ,⑦ i.e.
clear records by pressing ②, ③, ⑤, ⑥ and ⑦ may cause the decreasing of max capacity of
record quantity. Clearing by mode ①, the max capacity of record quantity will be recovered to
1000 groups. If not clearing records by mode ① all the while, decreased records will be recovered
gradually.
▲! Cleared data is nonrecoverable. So please be careful to avoid incorrect operation and
data loss.
▲! All weighing records shall be cleared after calibration or printing parameter
modification.
To Next Page
Loading...
Need help?
General