lc)
FAN
ON AUTO
O
Mon
I
r1
:1
Set At
I LI • LI _I
"wo
g g
AM
I
I
Temperature
1 ,J
SYSTEM
,
COOL OFF HEAT
Caution:
When the battery icon
appears replace your AA
batteries immediately. Failure
to do so may result in your
heating & cooling system
becoming inoperable.
THERMOSTAT OPERATION
Easy to use controls
0 LCD Display:
See page 2 for details about this display
read out and icons.
0 Glow in the Dark Light Button:
The glow in the dark light button will
self illuminate for several hours after
exposure to ambient light. This button
turns on the display light when pressed.
® Fan Switch:
Select
ON
or
AUTO. ON
will run
the fan continuously.
AUTO
will cycle
the fan on only when the heating or
cooling system is on.
® System Switch:
Selects the operation mode of your
HVAC system. Selecting HEAT
turns
on the heat mode. Selecting
COOL
turns on the air conditioning mode.
Selecting
OFF
turns both heating
and cooling off.
0 Temperature Setpoint Buttons:
Press the + or - buttons to select the
desired room temperature.
0
User Buttons:
Use these buttons to set up your
programming options. Refer to the
next page for instructions.
O
To Next Page
Loading...
