Pro1 IAQ T715 - Thermostat Quick Reference Guide; Key Display Indicators; Important Battery Replacement Notice; Battery Door Information

PROGRAMMING THE THERMOSTAT
Set Time
Follow the steps below to set the current time:
1. Press
MENU
2. Press
SET TIME
3.
Day of the week will be flashing.
Use the

or 
key to select the current
day of the week.
4. Press
NEXT STEP
5.
The current hour is flashing.
Use the 
or 
key to select the current
hour. When using 12-hour time, make sure the
correct a.m. or p.m. choice is selected.
6. Press NEXT STEP
7.
Minutes are now flashing.
Use the
 or 
key to select
current minutes.
8. Press
DONE
when completed
Important:
You will see a
TECH SET
option after the MENU key
is pressed.
This TECH SET key is for
installer configuration and
should NOT be changed
unless you consult your
Professional Heating and
Air Conditioning Technician.
Set Program Schedule
To customize your program schedule, follow these steps
Weekday:
1. Select HEAT or COOL
from the system switch.
Note: You have to program heat and cool each
separately.
2. Press MENU
3. Press SET SCHED.
Note: Monday-Friday is displayed
and the WAKE
icon is shown. You are now program-
ming the wake time period for the weekday setting.
4.
Time is flashing. Use the  or 
key to make
your time selection for the weekday
WAKE time period.
5. Press NEXT STEP
6.
The setpoint temperature is flashing. Use the

or
key to make your setpoint selection for the weekday
wake period.
7. Press NEXT STEP
8. Repeat steps 4 through 7 for weekday
LEAVE time
period, for weekday RETURN
time period, and for
weekday SLEEP time period.
Saturday:
9. Repeat steps 4 through 7 for
Saturday WAKE time period,
for Saturday LEAVE time
period, for Saturday RETURN
time period, and for Saturday
SLEEP time period.
Sunday:
10. Repeat steps 4 through 7 for
Sunday WAKE time period,
for Sunday LEAVE time
period, for Sunday RETURN
time period, and for Sunday
SLEEP time period.