EasyManua.ls Logo

Pro1 IAQ T755H User Manual

Pro1 IAQ T755H
14 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
This manual covers the following models:
• T755H
INSTALLATION MANUAL
A trained, experienced technician
must install this product.
Carefully read these instructions. You
could damage this product or cause a
hazardous condition if you fail to follow
these instructions.
Need Help?
For assistance with this product please
visit http://www.pro1iaq.com or call Pro1
Customer Care toll-free at 888-Pro1iaq
(776-1427) during normal business hours
(Mon-Fri 9 AM - 6 PM Eastern)
Table of Contents
Thermostat Applications Guide
Page
Battery Power
Hardwire (Common Wire)
Hardwire (Common Wire) with Battery Backup
Power Type
1
Rev. 1021
Una versión española de este
manual puede ser descargada
en www.pro1iaq.com
® U.S. Registered Trademark. Patents pending.
Copyright © 2010 Pro1 IAQ, Inc. All rights reserved.
Installation Tips
Thermostat Quick Reference
Subbase Installation
Wiring
Technician Setup Menu
Setting The Humidity
Mounting and Battery Installation
Programming The Thermostat
Specifications
2
3
4
5
6-9
10
11
12-13
14
noitpircseD
Gas or Oil Heat
Electric Furnace
Heat Pump (No Aux. or Emergency Heat)
Heat Pump (with Aux. or Emergency Heat)
Multi-stage Systems
Heat Only Systems
Cool Only Systems
Millivolt
Any HVAC System up to 3H/2C with
standard low voltage controlled humidifier.
Any HVAC System up to 3H/2C with
standard low voltage controlled de-humidifier.
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Question and Answer IconNeed help?

Do you have a question about the Pro1 IAQ T755H and is the answer not in the manual?

Pro1 IAQ T755H Specifications

General IconGeneral
ConnectivityWi-Fi
ProgrammableYes
DisplayTouchscreen
Mobile AppYes
Voice ControlAmazon Alexa, Google Assistant
Programmability7-day programmable
SensorTemperature, Humidity
Remote AccessYes
Indoor Air Quality MonitoringYes
Humidity ControlYes

Summary

Thermostat Applications Guide

System Compatibility

Details system compatibility and power source options for the thermostat.

Support Contact Information

Provides contact information for customer support and troubleshooting assistance.

Installation Tips

Optimal Wall Locations

Guide for optimal thermostat placement on walls, considering air circulation and temperature.

Unsuitable Installation Locations

Lists specific areas and conditions to avoid for thermostat installation.

Thermostat Quick Reference

Thermostat Components Overview

Identifies and describes key parts of the thermostat interface and buttons.

Removing the Private Label Badge

Instructions on how to carefully detach the removable decorative badge.

Subbase Installation

Mounting Screw Placement

Details screw placement for both vertical and horizontal mounting orientations.

Subbase Mounting Note

Emphasizes ensuring a solid fit by mounting the subbase flush to the wall.

Wiring

Wiring Installation Steps

Steps for connecting wires to the thermostat terminals, including system compatibility notes.

Terminal Designations

Explains the function of each terminal for conventional and heat pump systems.

Technician Setup Menu

Installer Configuration Steps

Outlines the process for accessing and navigating the installer setup menu.

Setup Menu Options Explained

Details settings like filter reminders, temperature calibration, and compressor delays.

Technician Setup Menu (Continued)

Advanced Setup Options

Covers morning recovery, temperature units, clock format, fan control, and programming modes.

Technician Setup Menu (Continued)

Heat Pump Configuration

Configures thermostat for heat pump operation, including emergency heat settings.

System and Auxiliary Heat Settings

Covers system switch, gas auxiliary, heat stages, and cooling fan delay.

Technician Setup Menu (Continued)

Humidity and Dehumidification Control

Configures humidity, dehumidification, calibration, and AC control settings.

HUM and DHM Terminal Functions

Explains the operational logic for the HUM and DHM terminals.

Setting the Humidity

Target Humidity Setpoint Adjustment

Steps to change the desired humidity level for heating and cooling modes.

Ambient Humidity Display and Recommendations

Explains ambient humidity display and provides recommended humidity levels.

Mount Thermostat & Battery Installation

Thermostat Mounting Procedure

Details how to align and attach the thermostat unit to its subbase.

Battery Installation Guide

Explains how to install AA batteries for optional thermostat power backup.

Programming The Thermostat

Setting the Current Time

Step-by-step guide to set the day of the week and the current time.

Default Program Schedule

Presents the thermostat's pre-programmed energy-saving schedule for weekdays and weekends.

Programming The Thermostat (Continued)

Customizing the 5+1+1 Program Schedule

Instructions for planning and setting up a personalized weekly program schedule.

Specifications & Contact Information

Product Specifications

Lists technical details like temperature range, load rating, accuracy, and dimensions.

Company Contact Information

Provides company address, toll-free numbers, website, and hours of operation.

Related product manuals