18
REMOVING/INSTALLING ARMRESTS
Removing
1. Press in and hold the armrest release
button at the front of the armrest.
2. Pull straight up to remove armrest from arm
sockets
Installing
1. Position the armrest over front and rear
arm sockets
2. Push the armrests down and evenly at both
ends until the front release button snaps
into arm socket hole.
ADJUSTING ARMREST HEIGHT (ADJUSTABLE HEIGHT ARMS
ONLY)
Unlock the armrest by flipping the height adjustment lever on the top front of the armrest
base to the UP (HORIZONTAL) position.
NOTE: Height adjustment lever MUST be in the unlocked position when placing armrest
into the armrest base.
1. Adjust armrest to desired height.
2. Lock the armrest by pressing the height adjustment lever into the DOWN
(VERTICAL) position when the desired armrest height is achieved.
3. Check that the armrest is locked into position by gently lifting up. If not locked, repeat
STEP 3.
To Next Page
Loading...