Clean carbon deposits from the spark plug
after every 100 hours of operation or every 6
Remove the spark plug cap sitting on the
Brush away any dust from the area around
Unscrew the spark plug using a spark plug
Use a feeler gauge to measure the electrode
gap, which should be 0.7-0.8 mm.
Clean the spark plug with a steel brush or
Retighten the spark plug fully and replace
Other engine parts may only be serviced,
repaired or adjusted by an authorised
Note: Please quote the product model
number in connection with all inquiries.
The model number is shown on the front of
this manual and on the product rating plate.
• Open weekdays from 07.00 to 17.00
• E-mail: service@hpschou.com
To Next Page
Loading...
