English - 10 -
To Switch the TV On
Standby Programme +/- or a
TV in.
Standby
To power down the TV completely, unplug the
power cord from the mains socket.
Note: When the TV is switched into standby mode, the standby
LED can blink to indicate that features such as Standby
Search, Over Air Download or Timer is active. The LED can
also blink when you switch on the TV from standby mode.
First Time Installation
OK
OK
Store Mode
Home Mode
available in Settings>System>More
OK
Next
OK
About Selecting Broadcast Type
OK
OK
Digital Aerial: If D. Aerial
Digital Cable: If D. Cable
YesOKNetwork
FrequencyNetwork ID and
Search Step No
OK Start Frequency Stop
Frequency and Search Step
Next OK
Note: Searching duration will change depending on the
selected Search Step.
Analogue: If Analogue
Channels
Edit
Menu
(*)YesOK .
(*) LCN is the Logical Channel Number system that organizes
available broadcasts in accordance with a recognizable
channel number sequence (if available).
Note: Do not turn off the TV while initializing first time
installation. Note that, some options may not be available
depending on the country selection.
Media Playback via USB Input
You can connect 2.5” and 3.5” inch (HDD with external power
supply) external hard disk drives or USB memory stick to your
TV by using the USB inputs of the TV.
IMPORTANT!
To Next Page
Loading...
