Procom FIB100 - Preparation; Estimated Assembly Time and Tools; Assembly Instructions; Step 1: Remove upper fire box

4
Fig.1
ASSEMBLY INSTRUCTIONS
PREPARATION
Beforebeginningassemblyofproduct,makesureallpartsarepresent.Comparepartswith
packagecontentslist.Ifanypartismissingordamaged,donotattempttoassemblethe
product.Contactcustomerserviceforreplacementparts.
EstimatedAssemblyTime:30minutes
ToolsRequiredforAssembly:PhilipsScrewdriverandWireCutter
1.Removeupperreboxbyunscrewing
left/rightscrewsontherebox.SeeFig.1.
Beforeinstallingtheblower,becertain
toturnofftheunit,andallowtimefor
unittocooldown.
This blower contains assembly instructions for the following models and item numbers.
For the CRHFD28TCM-6-AU (Item # 0309527), CRHFD32RT-M-MO, FBD28 and FBD32 series,
PC32VFC and PC36VFC