Prodigy Autocode Quick Reference Guide

Speaks In
4 Languages
Setting Up and Using a Lancing Device
1
2
3
Unscrew the cap.
Insert a new lancet into
the lancing device.
Twist off the cap on the
lancet and save it for
later use. Replace the
lancing device cap.
Set the lancing level.
Level 5: deepest penetration
Level 1: least penetration
Cock the lancing device.
1
2
3
Press the release button
to puncture the skin.
Slide the eject button to
eject the lancet. Discard
the lancet according to
local safety regulations.
*Do not reuse lancets.
Unscrew the lancing
device cap then replace
the lancet cap onto the
lancet.
WARNING:
• Never share a lancet or lancing device.
• Always use a new, sterile lancet.
• Lancets are for single use only.
1
2
3
Quick Reference Guide

Prodigy Autocode Specifications

General

Measurement Range	20-600 mg/dL
Sample Size	0.6 µL
Test Time	6 seconds
Coding	No Coding Required
Battery Type	2 x AAA batteries
Automatic Shutoff	2 minutes
Data Port	USB
Operating Conditions	50-104°F (10-40°C)
Memory Capacity	Up to 450 test results