Prodigy VOICE User Manual (English)

Other manuals for Prodigy VOICE

Owner's Manual82 pages

Quick Reference Guide2 pages

Questions and Answers:

F
flemingdustinJul 26, 2025
How to fix a Prodigy Blood Glucose Meter control solution test that is out of range?
- C
  Christopher ReyesJul 27, 2025
  If the control solution test is out of range on your Prodigy Blood Glucose Meter, first read the instructions thoroughly and repeat the test. Ensure the control solution bottle is shaken well before testing and check that the control solution hasn't expired or been contaminated. The control solution should be at room temperature (less than 86°F/30°C) before testing. Also, repeat the test with a new test strip.
T
Timothy BeckerAug 6, 2025
What to do if the Prodigy VOICE test does not start after applying the sample?
- P
  Phillip CoxAug 6, 2025
  If the Prodigy Blood Glucose Meter test doesn't start after applying the sample, it might be due to several reasons. You may not have used a large enough blood sample, so try repeating the test with a new test strip and a larger sample. The test strip could be defective, so try a new one. Also, make sure you apply the sample when the flashing drop symbol appears on the display; if the meter has shut off automatically, repeat the test with a new strip.
J
jeffreywadeAug 15, 2025
Why does my Prodigy VOICE Blood Glucose Meter not display a message after inserting a test strip?
- K
  Kevin WrightAug 15, 2025
  If your Prodigy Blood Glucose Meter isn't displaying anything after you insert the test strip, the batteries might be dead, so replace them. Ensure the batteries are installed correctly. Also, make sure you're inserting the test strip correctly, with the bar end going into the port first.

Prodigy VOICE Specifications

General

Measurement Range	20-600 mg/dL
Test Time	6 seconds
Coding	No coding required
Memory	450 test results
Battery	2 AAA batteries
Voice Guidance	Yes
Display	LCD
Operating Humidity	10 - 90% RH
Operating Temperature	50°F to 104°F
Sample Size	0.6 μL