Blood Glucose Monitoring System - User’s Manual
Diagnostic Devices, Inc www.prodigymeter.com 1.800.243.2636
37
• Viewing Results on a Personal Computer
Results in memory can be transmitted to a personal computer. Prodigy Diabetes Management
Software and an Interface Cable are required before installation. The software can be
downloaded from www.prodigymeter.com. The interface cable is an optional accessory.
To learn more about Prodigy Diabetes Management Software or to obtain an Interface Cable
sold separately, please contact your local retailer or distributor.
STEP 1 Install Software
Install Prodigy Diabetes Management Software on your Computer by following the
instructions provided on Prodigy’s website: www.prodigymeter.com
STEP 2 Connect to Personal Computer
Connect the Interface Cable to your computer.
With the meter turned off, connect the Interface Cable to the
Data Port of the meter. Which is hidden by a plastic cover
on the bottom right side panel of the meter. “PC” will
appear on the display, indicating that the meter is ready
to transmit data.
STEP 3 Transmit Data
Follow the instructions provided in the software to transmit data. Results transmitted will
include date and time. Remove the cable and the meter will automatically turn off.
PLEASE NOTE
While the meter is connected to the PC, it is unable to perform a blood glucose test.
To Next Page
Loading...
