Prodigy Autocode Quick Reference Guide

Blood Glucose Testing
Wash your hands and the intended sample site before
and after using the system or obtaining blood samples.
Use only fresh capillary blood samples for testing.
Always use a new sterile lancet and keep the lancing
device clean.
Applying Blood Correctly
With the test strip inserted,
bring the meter close to
your finger or other test site
and place beside the blood
drop. The blood will
automatically be drawn into the absorbent channel once
the test strip is close enough to the blood drop. Do NOT
smear blood onto the test strip or place the blood on top
of the test strip.
Confirmation Window
If the absorbent channel
is not full, add more blood.
You will hear a
confirmation beep once
the channel is full.
Full
Channel
OK
Not Full
Channel
NOT OK
Thank you for choosing the Prodigy AutoCode®
blood glucose monitoring system. This quick
reference offers easy instructions on how to use
your Prodigy AutoCode® meter effectively.
Apply the Blood Sample
“ ” appears, apply blood.
The meter beeps.
“Testing.”
The meter counts down
from 6 to 1.
Insert Test Strip
Insert test strip, the meter powers
on automatically.
No Coding required.
“Your Prodigy
®
meter is on...
Please apply blood into the
test strip.”
V
O
I
C
E
S
P
E
A
K
S
Speaks In
4 Languages
Recalling Test Results
Your meter stores 450 of the most
recent blood glucose test results with
date and time in its memory. With the
meter powered off, press and hold the
“M” button to turn the meter on, then
press the “M” button again to enter
memory mode. The 7-day average will
appear. If you continue to press the “M”
button, the 14 and 28-day averages will
appear. After the averages, you can then review the
last 450 individual test results stored in the memory.
Hear and See Results
Hear and see accurate results.
“Blood glucose 103
milligrams per deciliter.”
©2013 Prodigy Diabetes Care, LLC. Prodigy®, AutoCode® and Prodigy AutoCode® are
registered trademarks of Prodigy Diabetes Care, LLC. All other trademarks are property of
their respective owners. All rights reserved. AQR16_Rev 4 12/13
Performing a Blood Glucose Test
V
O
I
C
E
S
P
E
A
K
S
V
O
I
C
E
S
P
E
A
K
S

Prodigy Autocode Specifications

General

Measurement Range	20-600 mg/dL
Sample Size	0.6 µL
Test Time	6 seconds
Coding	No Coding Required
Battery Type	2 x AAA batteries
Automatic Shutoff	2 minutes
Data Port	USB
Operating Conditions	50-104°F (10-40°C)
Memory Capacity	Up to 450 test results