Prodipe IEM7120 - Specifications

Actual product(s) may differ from illustrations/photographs used
Copyright © 2015 IPE Music
-12-
Specifications
IEM3 earphones

Earphone diameter: 10mm

Impedance: 16Ω

Sensitivity: 95±3 dB

Frequency response: 10Hz-22kHz

Cable length: about 1.2 m

Connector type: 3.5mm (stereo)

Supplied with two pairs of rubber earbuds (large size and small size)
IEM7120 (transmitter and bodypack receiver):
 Frequency stability: ± 0.005% PLL
 UHF frequency range: 700 to 770MHz
 Modulation : FM Stereo
 Operating range: 80m (optimum conditions, outside)
 Bandwidth: 24MHz
 S/N ratio: ＞105dB
 THD: ＜0.4% to 1KHz
 Frequency range: 40Hz～16KHz ± 3dB
IEM7120 transmitter:
 Output power: 30mW
 Harmonic modulation: ＜-60dBm

Audio input: Combo XLR/ 6.35mm Jack (x2)
 Audio output: Jack 6.35mm
 Dimensions (W x H x D): 210mm x 43mm x 206mm
 Weight: 2.5kg
Bodypack receiver:

Stereo separation: ≥45dB à 1KHz

Audio output: Jack 3.5mm (stereo headset)

Audio output power: 2 x 150mW to 1KHz (THD3%)

Battery type: two AA batteries (not included)

Electricity consumption (typical): 185mA

Battery life: about 7 hours (optimum conditions, outside)

Dimensions (W x H x D): 66mm x 108mm x 22mm
 Weight: 190g