Need help?Do you have a question about the PROEL AMP60XL and is the answer not in the manual?
Covers general safety warnings, electric shock risks, fire risks, and symbol explanations.
Highlights features like protection circuits, input priority, LED indicators, volume controls, EQ, and various input types.
Identifies and describes front panel elements like power switch, volume controls, EQ, LED indicators, and Vu-meter.
Details rear panel connectors for power, outputs, inputs, and special terminals like COM, PRE OUT, MAIN IN, and grounding.
Explains wiring for XLR inputs, selection of LINE/MIC/PHANTOM, and critical attention points for microphone use.
Explains how to connect speakers using constant impedance (4Ω) and constant voltage (25V, 70V, 100V) lines.
Details the procedure to deactivate the VOX priority function by modifying the CN7 connector configuration.
Covers general safety warnings, electric shock risks, fire risks, and symbol explanations.
Highlights features like protection circuits, input priority, LED indicators, volume controls, EQ, and various input types.
Identifies and describes front panel elements like power switch, volume controls, EQ, LED indicators, and Vu-meter.
Details rear panel connectors for power, outputs, inputs, and special terminals like COM, PRE OUT, MAIN IN, and grounding.
Explains wiring for XLR inputs, selection of LINE/MIC/PHANTOM, and critical attention points for microphone use.
Explains how to connect speakers using constant impedance (4Ω) and constant voltage (25V, 70V, 100V) lines.
Details the procedure to deactivate the VOX priority function by modifying the CN7 connector configuration.
General| Frequency Response | 20 Hz - 20 kHz |
|---|---|
| Signal-to-Noise Ratio | > 90 dB |
| Type | Power Amplifier |
| Power Output | 60W RMS per channel |
| Input Impedance | 10 kΩ |
| Output Impedance | 4-8 Ω |
| Inputs | 2 x RCA |
To Next Page
