Need help?Do you have a question about the PROEL PLML250SCN and is the answer not in the manual?
General| Pan | 540° |
|---|---|
| Tilt | 270° |
| DMX Channels | 16 |
| Focus | Motorized |
| Display | LCD |
| Power Consumption | 350W |
| Voltage | 100-240V |
| Type | Moving Head |
| Light Source | 250W LED |
| Color Wheel | 7 + open |
| Prism | 3-facet |
| Dimming | 0-100% linear |
| Control | DMX512 |
| Power Supply | AC 100-240V, 50/60Hz |
General warning for initial start-up and handling of the device.
Welcome message and instructions for unpacking the moving head.
Covers general warnings on voltage, damages, temperature, power plug, and handling.
Addresses fire risks, health hazards from light source, and keeping device away from children.
Details device type, power requirements, intended use, and operational limitations.
Provides precautions on heat, handling, installation spot, and safety rope usage.
Details the moving head's features: lamp, colors, gobos, effects, focus, prism, movements, filters.
Identifies and labels the main components of the moving head device.
Provides instructions for installing or replacing the device's lamp, including safety warnings.
Details how to fine-tune lamp position for optimal light performance and even distribution.
Covers safety regulations, expert approval, secondary attachments, and safe mounting practices.
Explains how to connect multiple fixtures using DMX 512 and controller, including addressing.
Illustrates DMX XLR connector pin assignments for input and output signals.
Explains the device's initial reset process after connecting to the mains power.
Details DIP switch settings for addressing and controlling the projector.
Lists DMX channels 1-10 and their respective functions and control parameters.
Explains how to set different functions using the function DIP-switches.
Recommends frequent cleaning using a damp cloth and avoiding alcohol or solvents.
Provides the procedure for replacing a blown fuse, including safety steps.
Presents detailed technical specifications of the device, including power, dimensions, and more.
To Next Page
