Need help?Do you have a question about the PROEL PLHT575ML and is the answer not in the manual?
General| Type | Moving Head |
|---|---|
| Pan Range | 540° |
| Tilt Range | 270° |
| Light Source | LED |
| Colors | RGBW |
Product is suitable for indoor use with ambient temperature below 35°C.
Familiarize with product, check for transport damage, and ensure proper ventilation.
Ensure power is off, wait for cooling, handle new lamp carefully.
The moving head uses a 3A/250V safety fuse; use an identical replacement.
Adhere to national norms; installation by authorized dealer; use secondary safety attachment.
Use Omega-holders, clamps, and screws for secure fixture attachment to truss.
Product uses DMX-512 signal for channel setting and multi-light control.
Connect lights in series using XLR cables from controller's output to light's input.
Use a 120 Ohm resistor across pins 2 and 3 of an XLR connector to prevent signal corruption.
A 5-core to 3-core XLR adapter may be needed if the controller uses a 5-core plug.
The unit performs a self-examination upon power-on before operation.
Details 6 DMX control channels: Dimmer, Strobe, Pan, Tilt, Pan fine, Tilt fine.
Use UP/DOWN to navigate and ENTER to confirm functions. EXIT exits menus.
To Next Page
