DESCRIPTION
Thank you for selecting Proel BUG TUBE PAR64 moving head. In order to ensure
your safty and use the light properly, please read this menu carefully and observe the
rules strickly .
This PAR64 Moving head adopts advanced designing and processing, has an elegant
housing which is made from high intensity and heat resistant complex plastic. There is
a LED to show the DMX code and function option and with a built-in electric circuit to
resist disturbance. The swing angle is 540° (Pan) x 180° (Tilt).
TECHNICAL SPECIFICATION
- Rated Voltage: AC 230V / 50Hz (AC 120V / 60Hz USA)
- Rated Power: 1050W
- Lamp: PAR64 (PLLP64A – PLLPP64B – PLLPP64C)
- Dielectric strength: 1.5 KV
- Insulation resistance: > 2M
Ω
- Number of channels: 6
- Control signal: DMX 512
- Control mode: DMX controller
- Colour effect: white
- Dimmer: linear 0-100%
- Scanning angle: 540° horizontal (Pan) – 180° vertical (Tilt)
- Dimensions (l x h x w): head in horizontal position mm. (400 x 420 x 250)
head in vertical position: mm. (400 x 480 x 250)
- Net weight: kg. 9,5
- Miscellaneous: auto check, digital display
SAFETY INSTRUCTIONS
- Inquiry a qualified maintainer before you maintain the product.
- Make sure the light power off before you install the lamp or move the equipment.
- Don’t use the different power voltage or different kinds of lamp.
- During use this light, it may generate high temperature to cause danger. Please
don’t put any inflammable or explosive material near the equipment, don’t touch
the light directly by hand.
- Make sure the distance of the equipment and is over 1 meter
- Don’t look at the lamp directly to avoid eyes injury
To Next Page
Loading...
