Store idle equipment. When not in use, tools must be
stored in a dry location to inhibit rust. Always lock up
tools and keep out of reach of children.
Do not force tool. It will do the job better and more
safety at the rate for which it was intended. Do not use
inappropriate attachments in an attempt to exceed the
tool capacity.
Use the right tool for the job. Do not attempt to force
a small tool or attachment to do the work of a large
industrial tool. Do not use a tool for a purpose for
which it was not intended.
Dress properly. Do not wear loose clothing of jewelry
as they can be caught in moving parts. Protective,
electrically non-conductive clothes and non-skid
footwear are recommended when working. Wear
restrictive hair covering to contain long hair.
Use eye and ear protection. Always wear ISO
approved impact safety goggles. Wear a full-face
shield if you are producing metal filings or wood chips.
Wear an ISO approved dust mask or respirator when
working around metal, and chemical dusts and mists.
Do not overreach. Keep proper footing and balance
at all times. Do not reach over or across running
machine.
Maintain tools with care. Keep tools sharp and clean
for better and safer performance. Follow instructions
for lubricating and changing accessories. The handles
must be kept clean, dry, and free from oil and grease
at all times.
Stay alert. Watch what you are doing; use common
To Next Page
Loading...
