Ground all machines. Always make sure your
machine is well connected to the earth. It may reduce
electric shock hazards.
Don’t use in dangerous environment. Don’t use
power machine in damp or wet locations, or expose
them to rain. Keep work area well lighted
Stop machine before servicing and when changing
accessories.
1.2 WARNING BEFORE OPERATION
Before start the machine, make sure the machine be
anchored to floor firmly, to avoid the machine turn on
one’s side.
Before fix workpiece, make sure worktable horizontal.
Before start the machine, make sure the adjusting
clamp handle locked firmly, to avoid worktable
deflection during working.
Before running worktable, make sure the thrust ball
bearing under worktable is lubricated sufficiently.
Do not touch the electrical switch with wet hands.
Before power on, make sure there is no any person
nor obstacles in the dangerous area of the rotating
machine.
Make sure workpiece be fixed firmly before rotate
worktable.
When adjust angle of worktable, make sure workpiece
be fixed firmly by external force, to avoid injury of
operator.
No part of body is allowed to close during rotating.
Overload is not allowed.
Keep table horizontal when move the machine.
To Next Page
Loading...
