ASC Computer Mount
1
INTRODUCTION
Thank you for purchasing this Profile Design Computer Mount. These instructions apply to the ASC Computer Mount.
Note to Dealers: If you install this product for the consumer, please provide him/her with this owner’s manual after installation.
Please read these instructions thoroughly before attempting to install this item. Proper installation is required for compliance with Profile Design's
warranty policy. If you are not familiar with installation of bicycle accessories, please seek the assistance of your local Profile design dealer by logging
on to www.profile-design.com and using "dealer search" or by calling Profile Design's customer service number p.# 888.800.5999.
Tools and materials required:
Your Cage kit should contain:
If anything is missing from the flask kit please contact your dealer.
• 2.5mm Allen Torque Wrench
• One (1) Computer Mount
• Two (2) M4x12mm (Only the ASC Pro Computer Mount)
To Next Page
Loading...
