ProFitter RMC-FA300PF User Manual (English)

To Next Page

Operating Instructions & Parts Manual RMC-FA300PF

ProFitter

Propane Construction Heater

Description

ProFitter

Model RMC-FA300PF heaters are 300,000 BTU/Hr construction heaters.

This heater uses propane gas for combustion, and electricity to run the fan. It

is primarily intended for temporary heating of well-ventilated buildings under

construction, alteration or repair. This heater should be utilized in sheltered, well-

ventilated areas, but never in occupied dwellings.

C US

Output Rating Maximum Fuel Regulator

Model BTU/Hr Fuel Consumption Ignition Outlet Pressure

RMC-FA300PF 300,000 Propane Vapor Only 13.9 lb/h Direct Spark, Interrupted 7-10 PSIG

Hot Air Output Minimum Supply Maximum Supply Size

Model Approx. (CFM) Motor Pressure to Regulator Pressure to Regulator L x W x H (Inches) 3VE59C

RMC-FA300PF 0.085 HP 25 PSIG (For purposes Max Bottle Pressure 33.7 x 12.6 x 20.5

1,720 RPM of input adjustment)

Table of Contents Page

Description .......................1

Speciﬁcations......................1

Unpacking ....................... 1

General Safety Information ........1-3

Theory of Operation................3

Installation......................3-5

Ventilation........................5

Operation ........................6

Maintenance ....................5-6

Storage ..........................6

Wiring Diagram....................6

Repair Parts Illustration

and Parts List ....................8-9

Troubleshooting Chart .............10

Warranty ........................10

Unpacking

1. Unpack all materials used to protect

the heater inside of carton. Retain

plastic caps attached to exposed

ﬁttings for use during storage.

2. Remove heater, accessories and all

hardware from carton.

3. Inspect all items for damage that may

have occurred during shipment.

GENERAL HAZARD

WARNING

FAILURE TO

COMPLY WITH THE PRECAUTIONS AND

INSTRUCTIONS PROVIDED WITH THIS

HEATER, CAN RESULT IN DEATH, SERIOUS

BODILY INJURY AND PROPERTY LOSS,

OR DAMAGE FROM THE HZARARDS OF

FIRE, EXPLOSION, BURN. ASPHYXIATION,

CARBON MONOXIDE POISONING, AND/

OR ELECTRIC SHOCK.

ONLY PERSONS WHO CAN UNDERSTAND

AND FOLLOW THE INSTRUCTIONS

SHOULD USE OR SERVICE THIS HEATER.

IF YOU NEED ASSISTANCE OR HEATER

INFORMATION SUCH AS AN INSTRUCTION

MANUAL, LABELS, ETCETERA, CONTACT

THE MANUFACTURER.

General Safety Information

IMPORTANT: Be sure to read and

understand all cautions and warnings,

before operating this heater. Keep

this instruction manual for future

reference, and use it as a guide to safe

and proper operation of the heater.

Various precautions appear throughout

this manual. Please review and pay

close attention to them. Below is an

explanation of the various levels of

caution required while operating this

heater.

DANGER

Indicates an im minen tly

hazardous situation

which, if not avoided, WILL result in death

or serious injury.

WARNING

Indicates a poten tially

hazardous situation

which, if not avoided, COULD result in

death or serious injury.

CAUTION

Indicates a poten tially

hazardous situa tion

which, if not avoided, MAY result in minor

or moderate injury.

FIRE, BURN,

INHALATION, AND

EXPLOSION HAZARD, KEEP SOLID

COMBUSTIBLES, SUCH AS BUILDING

Model Electrical Input Amperage

RMC-FA300PF 120 V, 60 Hz 0.65

Electrical Speciﬁcations

General Speciﬁcations

(6.3 kg/h)

(85.6 x 32 x 52.1 cm)

Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and

others by observing all safety information. Failure to comply with instructions could result in personal injury and/or property damage! Retain instructions for

future reference.

Speciﬁcations

Printed in China

Figure 1 – Model RMC-FA300PF