4
14. When connecting the power cord (see page
1
4), plug the power cord into a surge suppres-
sor (not included) and plug the surge sup-
pressor into a grounded outlet capable of car-
rying 15 or more amps. No other appliance
should be on the same circuit as the vibration
platform. Do not use an extension cord.
15. Use only a single-outlet surge suppressor
that meets all of the specifications described
on page 14. To purchase a surge suppressor,
see your local PROFORM dealer or call the
telephone number on the front cover of this
manual and order part number 146148, or
see your local electronics store.
16. Keep the power cord away from heated sur-
faces.
17. Never leave the vibration platform unattend-
e
d while it is running. Always unplug the
power cord and switch the reset/off circuit
breaker to the off position when the vibra-
tion platform is not in use. (See the drawing
on page 5 for the location of the circuit
breaker.)
18.
DANGER: Always unplug the power
cord when the vibration platform is not in
use and before cleaning the vibration plat-
form. Servicing other than the procedures in
this manual should be performed by an
authorized service representative only.
To Next Page
Loading...
Need help?
General
