M
A
INTEN
A
NCE
Défaut Cause probable Action requise
11. Abnormal noise in
the compressor
id in the suction
e
ck and re-set the expansion
lves. Check that the liquid sol
lves do not remain open when
achine stops
Discharge temperature
nsor is not stable or badly
ck sensor position
ulsion in oil crankcase
rrect lubrication
compressor mot
not start
pressure switch cuts-out
aragraph 3
gh pressure switch cuts-out
ck the cause and change fuses
ti-short cycle time delay rel
ternal security switched out
ck cause of increase in motor
ain circuit-breaker open
ose circuit-breaker
Compressor works
tinuously
trol system or other
aragraphs 12 et 13
tallation insufficiently
rge installation with refrigeran
aporators blocked or ice pre
Clean and defrost evaporators
34