5
FUNCTION DESCRIPTION
II. FUNCTION DESCRIPTION
Speed display, power level display, power indicator, failure warning, total mileage,
single mileage, single driving time display.
Power switch control, 6Km/h point control, wheel diameter setting, maximum
speed setting, idle automatic hibernation time setting, backlight brightness
setting, voltage level setting.
All the contents of the display screen (full display in boot 1S).
Total mileage ODO, single mileage TRIP A, single mileage TRIP B, battery current
voltage VOL, current operating current CUR, remaining mileage RM; Instrument
boot time TM.
Walk boost mode.
PAS: Power le position: 0 ~ 9 Adjustable.
Battery
Show Content Introduction.
1. DISPLAY FUNCTION.
2. CONTROL - SETTING UP FUNCTIONS.
3. COMMUNICATION PROTOCOL: UART.
3.2 MULTIFUNCTIONAL DISPLAY AREA.
3.3 VEHICLE MODES.
3.1 BATTERY POWER DISPLAY.
To Next Page
Loading...