Owner’s Handbook Page 7
Caring for your PROHEAT
Your PROHEAT has been designed to operate with a minimum of maintenance. Always return to your
authorized PROHEAT dealer for major service. Your PROHEAT dealer has the specialized equipment
necessary to keep your PROHEAT running safely and reliably.
For more maintenance information, refer to the Installation and Service manual 925860
at www.proheat.com
Operate the PROHEAT year round (winter & summer). Use the PROHEAT to preheat the
engine before starting. Savings will result from reduced engine idle time and maintenance.
This also keeps the PROHEAT components and fuel system in good running order.
PROHEAT annual maintenance:
A higher duty cycle may require a more frequent maintenance schedule.
Proper maintenance will result in the following benefits:
Note
cleaN heater eNcloSure
Note
• Remove the heater enclosure cover.
• Clean any accumulated debris or dust from
the components.
• Blow out the compartment with compressed air.
• Do not pressure wash.
• Make sure the opening around the exhaust
pipe is clear.
• Visually inspect all the components for wear
or damage.
• Maximum heat transfer to the coolant
• Minimum battery power draw
• Long term cost savings
• Increased reliability
Check
Combustion
Air Inlet for
restrictions.
Clean as
required.
To Next Page
Loading...
