To Next PageTo Next Page
Need help?Do you have a question about the Project Source F1A1F506CP and is the answer not in the manual?
Explains water hammer in PEX systems and how to minimize it.
Describes caution regarding inlet port connections and potential heat damage.
Details product compliance with EPA WaterSense and installation requirements.
Lists necessary preparations and tools before starting product assembly.
Guides on installation distances and wall mounting methods.
Details valve body connections, pipe compatibility, and special application notes.
Instructions for installing tub spout, shower arm, and shower head.
Steps for removing valve cap, checking leaks, and adjusting temperature.
Instructions for installing escutcheon, seal, and handle.
Procedure for rotating the valve 180° for back-to-back installations.
Steps to remove the shower head and screen washer.
Instructions for cleaning the screen washer with a toothbrush.
Guidance for reinstalling the screen washer and shower head.
Recommendations for cleaning the faucet finish to protect it.
Lists common problems like reversed hot/cold, low flow, and their solutions.
Details the faucet's warranty terms and conditions.
Lists all replacement parts with their descriptions and part numbers.
General| Brand | Project Source |
|---|---|
| Model | F1A1F506CP |
| Category | Bathroom Fixtures |
| Finish | Chrome |
| Flow Rate | 1.2 GPM |
| Material | Metal |
| Warranty | Limited lifetime |
