Need help?Do you have a question about the Projecta IC700 and is the answer not in the manual?
General| Brand | Projecta |
|---|---|
| Model | IC700 |
| Category | Battery Charger |
| Language | English |
Crucial safety precautions and warnings for using the battery charger.
Overview of the 7-stage charging process and its benefits.
Breaks down sulphation in batteries left flat for extended periods.
Preliminary charge process to protect battery and increase life.
Charges at maximum rate to a set voltage, reaching ~80% charge.
Explains the remaining 7-stage charging process details.
Features for adjusting output and selecting battery chemistry.
How to use the charger as a power supply for appliances.
Information on Wiring Harness and Rubber End Caps.
Explains LED patterns for Power, Charging, and Full status.
Details safety features like polarity and over-temperature protection.
Explains Switchmode technology and the cooling fan.
Information on the optional remote control display.
Technical specifications for IC700, IC1000, and IC1500 models.
Specifics of each charge stage (Desulphation to Float).
Supported battery ranges (Ah, CCA, MCA) and types.
Size and weight details for each charger model.
Identifies key parts like DC Leads, LEDs, buttons, and cords.
Visual representation of dimensions and connection points for models.
Shows the Vehicle Harness and its components.
Guide on checking and topping up battery electrolyte levels.
Instructions for connecting the charger to a battery outside a vehicle.
How to connect the charger to a negatively earthed vehicle battery.
How to connect the charger to a positively earthed vehicle battery.
Using the wiring harness (IC700) for vehicle connections.
Connecting the charger to the mains power supply.
How to select the appropriate charge rate for the battery.
Table showing recommended current settings for different battery capacities.
Guide to selecting the correct battery chemistry (GEL, AGM, WET, Calcium).
How to interpret LED indicators during the charging process.
Procedures for safely disconnecting the charger from the battery.
Specific electrolyte check for Calcium mode charging.
Guidelines for safely mounting the battery charger unit.
Instructions for hard-wiring the charger to a battery.
Detailed steps for permanent wiring, including fuse and ring terminals.
How to use the Multi-Chem function to select battery types.
Details on Power Supply, GEL, AGM, and WET charging modes.
Specifics for Calcium mode, including equalization and reconditioning.
Instructions on how to lock and unlock charger settings.
Identifies common fault codes and their solutions.
Answers on how to know if the battery is charged and charging LED issues.
Questions about using the charger as a power supply and reset behavior.
How to interpret LED indicators for different charging stages.
How to bypass stages and impact of appliance load during charging.
Using different chemistries and why Calcium mode takes longer.
Explanation of Calcium batteries and their benefits.
Details on warranty applicability, duration, and how to make a claim.
Information on consumer guarantees and contact details for distributors.
To Next Page
