To Next Page
L
Lisa MartinSep 14, 2025
What to do if Projecta Power Supply displays 'Loss of communication'?
- DDaniel JonesSep 14, 2025
If the Projecta Power Supply displays 'Loss of communication', check the communication lines.
What to do if Projecta Power Supply displays 'Loss of communication'?
If the Projecta Power Supply displays 'Loss of communication', check the communication lines.
What to do if Projecta Power Supply shows 'Short circuit'?
If your Projecta Power Supply displays 'Short circuit', you should remove the short circuit to resolve the issue.
What to do if Projecta IntelliJay PM200-BTJ Power Supply indicates 'Output short circuit'?
If the Projecta Power Supply indicates 'Output short circuit', the suggested solution is to remove the output short circuit.
What to do if Projecta Power Supply displays 'Fuse blown'?
If the Projecta Power Supply displays a 'Fuse blown' error, you should check the load and replace the fuse.
What to do if Projecta Power Supply shows 'Battery voltage high'?
If the Projecta Power Supply displays 'Battery voltage high', you should check the battery voltage.
What to do if Projecta Power Supply shows 'Module protection'?
If the Projecta Power Supply displays 'Module protection', you should check the module protection settings.
What to do if Projecta IntelliJay PM200-BTJ Power Supply displays 'Bulk stage time-out'?
If the Projecta Power Supply displays 'Bulk stage time-out', check the bulk charging process.
What to do if Projecta Power Supply shows 'Bulk charge timeout'?
If the Projecta Power Supply displays 'Bulk charge timeout', you should check the bulk charge process.
What to do if Projecta Power Supply shows 'Internal temperature high'?
If the Projecta Power Supply displays 'Internal temperature high', check the internal temperature.
What to do if Projecta Power Supply shows 'House battery voltage low'?
If the Projecta Power Supply displays 'House battery voltage low', you should check the house battery voltage.
General| Brand | Projecta |
|---|---|
| Model | IntelliJay PM200-BTJ |
| Category | Power Supply |
| Language | English |
Lists crucial safety precautions for operating the 12V power management system.
Lists key capabilities like smart battery charging, multi-stage algorithm, solar control, and fused outputs.
Digital control center for the transformer unit with Bluetooth connectivity for smart devices.
Monitors up to 4 water tanks with specific probe styles (PMWS200, PMWS400).
Unit accepts inputs from AC mains, solar panel, and vehicle battery.
Automatically charges batteries via AC, alternator, or solar using multi-stage charging.
Unit functions as a power supply with 12.8VDC output when no battery is attached.
Built-in PWM charger for house battery with max input voltage 25VDC and 30A charging.
Manages charging from the alternator to the house battery based on vehicle battery voltage.
Details the front panel layout and numbered connections of the PM235J Transformer Unit.
Provides dimensions and mounting details for the PMLCD-BTJ LCD monitor.
Explains installation and dimensions for PMWS400 and PMWS200 water tank probes.
Lists components and their part numbers for the PM200-BTJ system wiring.
Illustrates the overall system connections for PM200-BTJ and PM235J-NODE.
Recommends minimum cable sizes and preparation for installation.
Details recommended terminal types and cable gauges for connection.
Explains the LED indicator status for the PM235J transformer unit for fault diagnosis.
Details monitor overview, symbols, switches, and alphabet codes for operation.
How to configure battery type and capacity via monitor or app.
Accessing and navigating the LCD monitor configuration menu with passcodes.
Steps to pair and connect the system to a smartphone via Bluetooth.
How to use the app for monitoring, battery setup, and controlling system functions.
Guidelines for maintaining battery SOC and performing daily checks.
Explains the LED indicator status for the PM235J transformer unit for fault diagnosis.
Lists and explains error codes displayed on the LCD monitor for troubleshooting.
Detailed electrical parameters for Mains, Battery, Solar, Charging Relay, and Charger Mode.
Lists physical attributes like dimensions, weight, enclosure, and connector types.
