● After selecting auto mode, air conditioner will operate automatically according to
ambient temperature. Set temperature can’t be adjusted and also can’t be displa-
yed. Press
"
FAN
"
button can adjust fan speed.
●
After selecting cool mode, air conditioner operates under cool mode. Cool indicator
" " on the unit is ON. You can press "+" or "-" button to adjust set temperature.
Press
"
FAN
"
button can adjust fan speed.
● After selecting dry mode, air conditioner operates under dry mode at low speed.
Dry indicator
" "
on the unit is ON. Under dry mode, fan speed can’t be ad-
justed.
● After selecting fan mode, air conditioner operates only under fan mode, All mode
indicators on the unit is OFF. Operation indicator is ON. Press
"FAN" button can
adjust fan speed.
●
After selecting heat mode, air conditioner operates under heat mode. Heat indicator
"
" on the unit is ON. You can press "+" or "-" button to adjust set temperature
.
Press "FAN" button to adjust fan speed.
Cool&Heat Unit only
Introduction for buttons on remote controller
Note:
●
After putting through power, air conditioner will give out a sound and operation
indicator
"
"
is ON (red indicator). You can operate the air conditioner through
the remote controller.
●
At ON status, after each pressing button on remote controller, the signal icon " "
indicates the signal has been sent to air conditioner.
● At OFF status, display screen on remote controller displays set temperature.
At on status, display screen on remote controller displays the corresponding startup
function’s icon.
ON/OFF button
MODE button
1
2
Press this button can turn on or turn off the air conditioner. After turning on the unit,
operation indicator
"
"
on the unit is ON (green indicator. Color may be differ-
ent for different models) and the unit gives out a sound.
Press this button can select your required operation mode.
AUTO COOL FANDRY HEAT
To Next Page
Loading...
Need help?
General
