Suppose you want to set the following cooking program.
Defrost (5 minutes)
Microwave cooking (80% power level for 7 minutes)
1. Press twice, “dEF2” appears on the display.
2. Turn to select the defrosting time until “5:00” displays.
3. Press once.
4. Turn or press repeatedly to select the microwave power level until
“P80” displays.
5. Press to confirm.
6. Turn to select the cooking time until “7:00” displays.
7. Press to start cooking.
Note: After one cooking stage is finished, a beep sound is heard, indicating the
next cooking stage has begun.
Pre-set Function
1. Set the clock. (See ‘Setting the Clock’)
2. Set a cooking program.
3. Press , the hour digits blink.
4. Turn to adjust hour digits, the input hour should be a 24-hour time
value.
5. Press , the minute digits blink.
6. Turn to adjust the minute digits.
7. Press to finish the setting. “:” blinks on the display.
8. When the preset time is reached, two beeps will sound then the cooking will
start automatically.
Menu Cook
1. Turn to select the desired menu code from the table below.
2. Press to confirm.
3. Turn to select the food weight.
4. Press to start cooking.
GB
Defrost cannot be set as the cooking program.
Follow the steps 3 to 6 of “Multi-stage Cooking”.
Downloaded from www.vandenborre.be
To Next Page
Loading...
