161
3. After nishing your adjustment, Press MENU button to save and return back
to the previous Menu.
Picture Mode
Press / button to select Picture Mode, then press OK button to enter sub-
menu.
You can change the value of contrast, brightness, colour, sharpness and tint
when the picture is in Personal mode.
TIPS: You can press PMODE button to change the Picture Mode directly.
Contrast/ Brightness/ Colour/ Tint / Sharpness
Press / button to select option, then press ENTER/ button to adjust.
Contrast
Brightness
Colour
Tint
Sharpness
Colour Temp
Adjust the highlight intensity of the picture, but the shadow of the
picture is invariable.
Adjust the optical bre output of the entire picture, it will aect the
dark region of the picture.
Adjust the saturation of your desired colour.
Use in compensating colour changed with the transmission in the
NTSC code.
Adjust the peaking in the detail of the picture.
Change the overall colour cast of the picture.
Press / button to select Colour Temperature,
and then press OK button to enter sub-menu.
Cold Increase the blue tone for the white.
Normal Increase the sex-linked colours for the
white.
Warm Increase the red colour for the white.
L5020UHD LED IB.indd 161L5020UHD LED IB.indd 161 29/5/2023 9:46 AM29/5/2023 9:46 AM
To Next Page
Loading...
Need help?
General
