21
●
Attention
●
Starting the dishwasher
The followings should be checked before starting the dishwasher.
1
Whether the dishwasher is level and stable
2
Whether the water inlet valve is open
3
Whether there are leaks at the connections of the water pipes
4
Whether the mains plug is tightly in the wall socket
5
Whether the power is switched on
6
Whether the inlet and drain hoses are knotted
7
All packing materials and should be removed from the dishwasherinstructions
After installation, keep these instructions for future reference.
Water Outlet
Connect the water drain hose. The drain hose must be correctly fitted to avoid water leaks.
Ensure that the water inlet hose is not kinked or squashed.
Extension Hose
If you need a drain hose extension, use a similar drain hose.
It must be no longer than 4 metres; otherwise the cleaning effect of the dishwasher could be reduced.
Syphon Connection
The waste connection must be at a height of between 50 cm (minimum) and 100 cm (maximum)
From . The water drain hose should be fixed by a hose clip.ground level
To Next Page
Loading...
Need help?
General
