Jumpstart Problems
The engine receiving the
boost is not starting.
Powerstation’s battery is not fully
charged
The engine condition is poor
The engine start capacity exceeds
the booster capability of the
Powerstation.
Recharge the battery.
Contact Promate Service.
Charging Problems
The charging Status light is
off when the AC charger is
connected.
NO AC power at the AC wall
outlet.
Faulty AC charger.
Ensure that power is available at
the AC wall outlet.
Replace the AC charger.
WARNING! ELECTRIC SHOCK HAZARD
Do not open the housing or disassemble the Powerstation, except when replacing the internal battery. The unit
contains no user-serviceable parts, and attempting to repair it yourself could lead to electric shock or burns.
Electrical shock or burn.
To Next Page
Loading...
